The lighting plastic casing requires good light transmission, corrosion resistance, high temperature resistance, insulation, high melting point, thermosetting property, stable nature, good plasticity, etc., so the standard is very high in the production process.Ultrasonic technology has an excellent welding effect on the production of most lighting products.
Sensors and electrical components are used in both industrial manufacturing and automation technology or in everyday life. Ultrasonic welding is most suitable in the production of these components, which can meet the many requirements of the product.
Ultrasonic welding can reduce the production cost and ensure the production safety and reproducibility of the joining process.
The bonding of automotive parts must meet the highest welding quality: tightness, firmness, dimensional accuracy and flawless appearance. Ultrasonic welding provides a fast and economical solution to these complex process requirements.
Ultrasonic sealing provides the possibility of using thermoplastic coated packaging materials such as capsules, bags, beverage cartons, beverage cups and covers: even if fillers remain in the weld area, high speed production and manufacturing are guaranteed.
Ultrasonic welding of non-woven materials is very fast and stable, repeatable, and can be started immediately without preheating. This technology can perform three processes of imprinting, laminating and cutting simultaneously.
Plastic toy welding is caused by the high-frequency energy generated by the ultrasonic welding head to increase the temperature of the interface to the melting point of the workpiece itself. The workpiece interface melts rapidly. After the vibration stops, the workpiece is cooled and shaped under a certain pressure to achieve perfect welding.
When ultrasonic waves act on the liquid, the rupture of each bubble in the liquid will produce a shock wave with a great energy, which is equivalent to the high temperature of several hundred degrees in an instant and up to thousands of atmospheres. The ultrasonic cleaning is the shock wave generated by the bubble burst in the application liquid. To clean and wash the inner and outer surfaces of the workpiece
Apply complex ultrasonic bonding technology to injection molded plastic parts. The intelligent software and rich styles of the welding machines can fully meet your personalized needs: precise, comprehensive and economical.
Ultrasonic metal welding machine can perform single point welding, multi-point welding and short strip welding on filament or sheet material of non-ferrous metals such as copper, silver, aluminum and nickel. Can be widely used in thyristor leads, fuse sheets, electrical leads, lithium battery pole pieces, tab welding.
The hand-held ultrasonic welding machine can be used for butt welding of thermoplastics. It can also be used to replace the welding head according to customer requirements. It can be used in the processing of welding, spot welding, embedding, cutting, etc. It has high production efficiency and good welding quality compared with other traditional processes. Significant advantages such as environmental protection and energy saving.
The high-speed rotating friction of the upper and lower circular parts causes the contact surface friction of the upper/lower workpiece to heat up. After the contact surface is melted, the pressure is instantaneously stopped at the set position, and the welding becomes a permanent fusion to form a fastening. And the closed whole.
It is mainly suitable for the welding of thermoplastic materials such as PP and PE and plastic parts with large and complicated weld area. For example: car water tank, fuel tank, carbon canister, brake fluid tank, bumper and so on.
When the heat welder is welded, the workpiece is in close contact with the heating plate, and the contact surface of the plastic part reaches a certain degree of melting after the pre-set heating time is completed and leaves the hot plate, the heating plate is automatically removed, and the two pieces are quickly pressed under pressure. Together, after a certain cooling and curing time and welding depth are reached, the welding is completed.
Ultrasonic wave propagation in the liquid, the liquid and the cleaning tank in the ultrasonic frequency vibration, and the liquid cleaning tank has its own inherent vibration frequency, the vibration frequency is the frequency, so people can hear the hum.
With the continuous development of the cleaning industry, more and more industries and enterprises have been applied to ultrasonic cleaning machine.
Lingke Automation Technology (Zhuhai) Co., Ltd. is one of the toppest KN95
Mask Spot Welding Machine,Ultrasonic Mask Welding Machine,N95 Mask Piece-Sliced
Machine in China.During these years of exporting , Lingke Automation Technology
(Zhuhai) Co., Ltd. now has rich experience in the worldwide markets.
Originated in 1993, Lingke has 28 years’ experience of product development and marketing services and plays an important role in the domestic ultrasonic welding machine industry. We focus on production and sales of ultrasonic plastic welding machine, spin welding machine, hot plate welding ...
1. Lingke Enterprise was founded in 1995, its four brands "LINGKE", "LINGGAO ",
2. In order to better serve the market and customers, Lingke Enterprise's brand “LINGGAO ” series products (machines and accessories) have ag...